ABB Error 71514 — Device command connection error

What it means · Ce que ça veut dire

Device command connection error — ABB robot hardware event on the Device command connection error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Could not send device command arg to the I/O device arg because no active connection was present. The device command was not sent. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Device command connection error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check the device command syntax.
• Make sure that the network cable is connected to the controller.
• Make sure the I/O device has is correctly powered.
• Make sure the cabling to the I/O device is correctly connected.
• 4.8 7 xxxx

Frequently asked · Questions fréquentes

What does ABB error 71514 mean?

ABB 71514 (“Device command connection error”): Device command connection error — ABB robot hardware event on the Device command connection error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71514?

Inspect the Device command connection error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés