ABB Error 71519 — Too many PROFINET Networks are configured

What it means · Ce que ça veut dire

Too many PROFINET Networks are configured — ABB robot hardware event on the Too many PROFINET Networks are configured (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Too many PROFINET Controller/Device networks are configured. It is only possible to have one network for PROFINET Controller/Device. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Too many PROFINET Networks are configured, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Remove all except one of the PROFINET Controller/Device networks from the configuration.
• Restart the controller.

Frequently asked · Questions fréquentes

What does ABB error 71519 mean?

ABB 71519 (“Too many PROFINET Networks are configured”): Too many PROFINET Networks are configured — ABB robot hardware event on the Too many PROFINET Networks are configured (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71519?

Inspect the Too many PROFINET Networks are configured, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés