ABB Error 71573 — PROFINET configuration mismatch

What it means · Ce que ça veut dire

PROFINET configuration mismatch — ABB robot hardware event on the PROFINET configuration mismatch (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The I/O device arg reported a different slot configuration then configured in the system. Module in slot arg is of wrong type. Some I/O signals might not be possible to use. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the PROFINET configuration mismatch, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The module type used in slot arg may be of wrong type or of a different version compared to the actual hardware on the I/O device.
• Update the PROFINET configuration file to match the hardware.
• Check the I/O device.

Frequently asked · Questions fréquentes

What does ABB error 71573 mean?

ABB 71573 (“PROFINET configuration mismatch”): PROFINET configuration mismatch — ABB robot hardware event on the PROFINET configuration mismatch (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71573?

Inspect the PROFINET configuration mismatch, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés