ABB Error 71623 — Password could not be decrypted

What it means · Ce que ça veut dire

Password could not be decrypted — ABB robot hardware event on the Password could not be decrypted (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The password supplied for the FTP/SFTP client or for the Integrated Vision camera arg, is invalid or could not be decrypted. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Password could not be decrypted, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• The encrypted password has to be applied to the controller from which is was originally generated from.
• From the configuration editor in RobotStudio or in the sio.cfg, remove the encrypted password and enter the password again and restart the controller.
• Or verify that the sio.cfg applies to the controller it was generated from.
• 4.8 7 xxxx

Frequently asked · Questions fréquentes

What does ABB error 71623 mean?

ABB 71623 (“Password could not be decrypted”): Password could not be decrypted — ABB robot hardware event on the Password could not be decrypted (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71623?

Inspect the Password could not be decrypted, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés