ABB Error 90247 — Run Control status conflict, DRV4

What it means · Ce que ça veut dire

Run Control status conflict, DRV4 — ABB robot hardware event on the Run Control status conflict, DRV4 (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Status conflict between run control and motor contactors for drive system 4. The system goes to status SYS HALT. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Run Control status conflict, DRV4, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : A failure of the motor contactors or the supply to these.
• Check cables and connections.
• Restart the controller.

Frequently asked · Questions fréquentes

What does ABB error 90247 mean?

ABB 90247 (“Run Control status conflict, DRV4”): Run Control status conflict, DRV4 — ABB robot hardware event on the Run Control status conflict, DRV4 (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 90247?

Inspect the Run Control status conflict, DRV4, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés