ABB Error 90723 — Module F-Destination address already used

What it means · Ce que ça veut dire

Module F-Destination address already used — ABB robot hardware event on the Module F-Destination address already used (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Network arg , module arg F-Destination address arg already configured on module arg . The system will stop all robot movements. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Module F-Destination address already used, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The F-Destination address must be unique on the entire ProfiNet network.
• User has assigned the same F-Destination address to two different modules.
• Re-assign the erroneous module to the correct F-Destination address.

Frequently asked · Questions fréquentes

What does ABB error 90723 mean?

ABB 90723 (“Module F-Destination address already used”): Module F-Destination address already used — ABB robot hardware event on the Module F-Destination address already used (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 90723?

Inspect the Module F-Destination address already used, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés