ABB Error 90812 — GPIO register self-test failed

What it means · Ce que ça veut dire

GPIO register self-test failed — ABB robot hardware event on the GPIO register self-test failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The GPIO hardware diagnostics has detected an error on GPIO ID: arg . No operation will be possible until the fault has been corrected and the system have been restarted. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the GPIO register self-test failed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : This may be caused by faulty hardware.
• Restart the system and check if the error remains.
• If the error remains replace the Safety Controller board.

Frequently asked · Questions fréquentes

What does ABB error 90812 mean?

ABB 90812 (“GPIO register self-test failed”): GPIO register self-test failed — ABB robot hardware event on the GPIO register self-test failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 90812?

Inspect the GPIO register self-test failed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés