ABB Error 90814 — GPIO cyclic circuit test failed

What it means · Ce que ça veut dire

GPIO cyclic circuit test failed — ABB robot hardware event on the GPIO cyclic circuit test failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The GPIO cyclic circuit test failed on GPIO ID: arg . No operation will be possible until the fault has been corrected and the system have been restarted. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the GPIO cyclic circuit test failed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : This may be caused by faulty hardware.
• Make sure that all cables to the safety controller are properly attached.
• Restart the system and check if the error remains.
• If the error remains replace the Safety Controller board.
• 4.9 9 xxxx

Frequently asked · Questions fréquentes

What does ABB error 90814 mean?

ABB 90814 (“GPIO cyclic circuit test failed”): GPIO cyclic circuit test failed — ABB robot hardware event on the GPIO cyclic circuit test failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 90814?

Inspect the GPIO cyclic circuit test failed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés