LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm APSH-170 — WARN Check Nest/Changer Inputs

FANUC APSH-170 (“WARN Check Nest/Changer Inputs”): A macro program to dropoff or pickup studgun 1 or 2 has not been initialized. First check: Proceed to Spot Equipment Menu under MENUS-SETUP and initialize the studwelding macros which will only appear if STUD BACKUP is ENABLED at CONTROLLED START.

Updated 2026-09-17 · LogrobotLM reference

Description

A macro program to dropoff or pickup studgun 1 or 2 has not been initialized.

Remedy

Proceed to Spot Equipment Menu under MENUS-SETUP and initialize the studwelding macros which will only appear if STUD BACKUP is ENABLED at CONTROLLED START.

Related codes

APSH-168WARN No GO for EQP pressureAPSH-169WARN Uninitialized Stud MacrosAPSH-171HOME_IO has not completed runningAPSH-174WARN SCR overtemp detected

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →