LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CALB-024 — WARN Robot model is not supported.

FANUC CALB-024 (“WARN Robot model is not supported.”): The Auto Calibration software does not support this robot model. First check: There are certain robot models that the Auto Calib software does not support due to these model’s kinematic equation cannot be easily solved through calibration equations.

Updated 2026-09-17 · LogrobotLM reference

Description

The Auto Calibration software does not support this robot model.

Remedy

There are certain robot models that the Auto Calib software does not support due to these model’s kinematic equation cannot be easily solved through calibration equations.

Related codes

CALB-022WARN Memory is not available.CALB-023WARN Cannot converge to a solution.CALB-025WARN Sensor position is not set.CALB-026WARN No Link length data available.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →