LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-031 — There are not enough features in the training window.

FANUC CVIS-031 (“There are not enough features in the training window.”): There are not enough features in the image to train the model pattern. First check: Use another part of the image as the model.

Updated 2026-09-17 · LogrobotLM reference

Description

There are not enough features in the image to train the model pattern.

Remedy

Use another part of the image as the model. Or, teach a model using another image by taking it after adjusting the exposure time so that the contrast becomes high.

Related codes

CVIS-021Exceed VisPool(… Bytes)CVIS-030The model pattern is not trained.CVIS-032Bad arguments.CVIS-033The operation has timed out.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →