LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-063 — Target is too close

FANUC CVIS-063 (“Target is too close”): Vision Shift error. First check: The distance between a camera and a target might be shorter than the allowable distance limit.

Updated 2026-09-17 · LogrobotLM reference

Description

Vision Shift error. Unable to find a target in a image because the target in the image is too large.

Remedy

The distance between a camera and a target might be shorter than the allowable distance limit. Check the distance between the target and the camera, or adjust the 'Distance Limit' parameter in Vision SETUP screen.

Related codes

CVIS-061Parameter is not initializedCVIS-062Target is rotated too muchCVIS-064Target is too far awayCVIS-065Target is tilted too much

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →