LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-065 — Target is tilted too much

FANUC CVIS-065 (“Target is tilted too much”): Vision Shift error. First check: The distance between a camera and a target may be longer than allowable distance limit.

Updated 2026-09-17 · LogrobotLM reference

Description

Vision Shift error. Unable to find a target in a image because the target in an image is too small.

Remedy

The distance between a camera and a target may be longer than allowable distance limit. Check the distance between the target and the camera, or adjust the 'Distance Limit' parameter in Vision SETUP screen.

Related codes

CVIS-063Target is too closeCVIS-064Target is too far awayCVIS-066Contrast is too lowCVIS-067Target is not clear

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →