FANUC Alarm CVIS-140 — The value … is out of range. The valid range is … to ….
Manufacturer wording — The value %s is out of range. The valid range is %s to %s.
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC CVIS-140 (“The value … is out of range. The valid range is … to ….”): The specified value is out of range. First check: Specify a value within the range.
Updated 2026-09-17 · LogrobotLM reference
Description
The specified value is out of range.
Remedy
Specify a value within the range.
Related codes
CVIS-138The robot name must start with a letter, contain no spaces, not contain the characters ¥¥/:*?¥"<>|CVIS-139Cannot delete this tool.CVIS-141The tool name '…' is already in use.CVIS-142The tool name must start with a letter, contain no spaces, not contain the characters ¥¥/:*?¥"<>|, and be 8 characters or less.
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →