LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-141 — The tool name '…' is already in use.

Manufacturer wording — The tool name '%s' is already in use.
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC CVIS-141 (“The tool name '…' is already in use.”): The specified name is already in use. First check: Specify another name.

Updated 2026-09-17 · LogrobotLM reference

Description

The specified name is already in use.

Remedy

Specify another name.

Related codes

CVIS-139Cannot delete this tool.CVIS-140The value … is out of range. The valid range is … to ….CVIS-142The tool name must start with a letter, contain no spaces, not contain the characters ¥¥/:*?¥"<>|, and be 8 characters or less.CVIS-143The image display is in the Graphic Edit Mode.¥n (Exit mode by pressing the flashing OK or Cancel button.)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →