LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-150 — Camera view index out of range

FANUC CVIS-150 (“Camera view index out of range”): The camera view index specified in the RUN_FIND command is out of range. First check: Type the correct camera view index for the vision process.

Updated 2026-09-17 · LogrobotLM reference

Description

The camera view index specified in the RUN_FIND command is out of range.

Remedy

Type the correct camera view index for the vision process.

Related codes

CVIS-148There are no found results.CVIS-149The image display is in Continuous S+F Mode.¥n (Exit mode by pressing the flashing Stop S+F button.)CVIS-151No more vision offsetsCVIS-152Failed to set ref. position

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →