LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-194 — The sorting parameters are not completely defined. Please select all sorting parameters.

FANUC CVIS-194 (“The sorting parameters are not completely defined. Please select all sorting parameters.”): The sorting parameters have not been completely defined for the vision process. First check: Select and specify all of the available sorting parameters.

Updated 2026-09-17 · LogrobotLM reference

Description

The sorting parameters have not been completely defined for the vision process.

Remedy

Select and specify all of the available sorting parameters.

Related codes

CVIS-192The system is low on temporary memory and cannot open the vision process setup page.CVIS-193The maximum number of setup pages are already open. A vision process setup page must be closed before another can be opened.CVIS-195The sorting parameters are now invalid.¥n They have been reset to the default values.CVIS-196Another setup page '…' is already in live mode.¥n Exit live mode in the other setup page first.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →