LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-196 — Another setup page '…' is already in live mode.¥n Exit live mode in the other setup page first.

Manufacturer wording — Another setup page '%s' is already in live mode.¥n Exit live mode in the other setup page first.
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC CVIS-196 (“Another setup page '…' is already in live mode.¥n Exit live mode in the other setup page first.”): You have tried to enable live mode in a setup page when another setup page was already in live mode. First check: Stop live mode in the other setup page first.

Updated 2026-09-17 · LogrobotLM reference

Description

You have tried to enable live mode in a setup page when another setup page was already in live mode. Live mode is only supported in one setup page at a time.

Remedy

Stop live mode in the other setup page first.

Related codes

CVIS-194The sorting parameters are not completely defined. Please select all sorting parameters.CVIS-195The sorting parameters are now invalid.¥n They have been reset to the default values.CVIS-197This tool was not foundCVIS-198Layer threshold exceeded limit

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →