LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-203 — Invalid calibration plane number.

FANUC CVIS-203 (“Invalid calibration plane number.”): An invalid calibration plane number is passed to the CAMERA_CALIB command. First check: Enter the correct plane number to the CAMERA_CALIB command.

Updated 2026-09-17 · LogrobotLM reference

Description

An invalid calibration plane number is passed to the CAMERA_CALIB command.

Remedy

Enter the correct plane number to the CAMERA_CALIB command.

Related codes

CVIS-201The camera calibration tool is corrupted.CVIS-202The camera calibration tool is corrupted.CVIS-204Either camera or fixture needs to be mounted on a robot.CVIS-205Both camera and fixture should not be mounted on a robot.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →