LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm CVIS-228 — The calibration planes are too close.

FANUC CVIS-228 (“The calibration planes are too close.”): The calibration planes are too close. First check: The calibration planes must be apart from each other.

Updated 2026-08-29 · LogrobotLM reference

Description

The calibration planes are too close.

Remedy · Remède

The calibration planes must be apart from each other.

Frequently asked · Questions fréquentes

What does FANUC alarm CVIS-228 mean?
FANUC CVIS-228 (“The calibration planes are too close.”): The calibration planes are too close.
How do you troubleshoot FANUC alarm CVIS-228?
The calibration planes must be apart from each other.

Related codes / Codes liés

CVIS-226Conditional Execution: Fail to get value.CVIS-227No found pose of parent locator tool.CVIS-229Model ID mismatch.CVIS-230Reference data is not set.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →