LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-236 — Encoder count of this robot is different from that of another robot.

FANUC CVIS-236 (“Encoder count of this robot is different from that of another robot.”): The encoder count of this robot is different from one of the other robots. First check: Turn all of the robots off and then on again.

Updated 2026-09-17 · LogrobotLM reference

Description

The encoder count of this robot is different from one of the other robots.

Remedy

Turn all of the robots off and then on again.

Related codes

CVIS-234Robot-mounted camera is not supported.CVIS-235Encoder count is not consistent with the current image.CVIS-237The points are too close together to calculate the frame.CVIS-238Double GetQueue from the robot.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →