LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-325 — There are not enough features in the training window.

FANUC CVIS-325 (“There are not enough features in the training window.”): There are not enough features in the image to train the model pattern. First check: Use another part of the image as the model or teach a model using another image by taking it after adjusting the exposure time or the contrast threshold so that a sufficient amount of the features are received.

Updated 2026-09-17 · LogrobotLM reference

Description

There are not enough features in the image to train the model pattern.

Remedy

Use another part of the image as the model or teach a model using another image by taking it after adjusting the exposure time or the contrast threshold so that a sufficient amount of the features are received.

Related codes

CVIS-323The model pattern is not trained.CVIS-324The operation has timed out.CVIS-326Saved laser image and laser number are not consistent. Change laser number in setup page.CVIS-327CSM Locator: No found pose of parent locator tool.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →