LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-331 — The search window is too small or set to the outside of the image.

FANUC CVIS-331 (“The search window is too small or set to the outside of the image.”): The specified search window is too small or set to the outside of the image. First check: When the search window is too small, set the search area larger.

Updated 2026-09-17 · LogrobotLM reference

Description

The specified search window is too small or set to the outside of the image.

Remedy

When the search window is too small, set the search area larger. When the search window is set to the outside of the image, confirm that parent locator tool finds the model correctly and change the search window if necessary.

Related codes

CVIS-329CSM Locator: The search window is too small.CVIS-330CSM Locator: A child tool is not trained.CVIS-332Cannot control the sensor powerCVIS-333The found positions are too close to each other.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →