LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm CVIS-352 — The two found positions are too close.

FANUC CVIS-352 (“The two found positions are too close.”): The two found positions are too close. First check: Please set trigger offset 1 and trigger offset 2 correctly.

Updated 2026-08-29 · LogrobotLM reference

Description

The two found positions are too close.

Remedy · Remède

Please set trigger offset 1 and trigger offset 2 correctly.

Frequently asked · Questions fréquentes

What does FANUC alarm CVIS-352 mean?
FANUC CVIS-352 (“The two found positions are too close.”): The two found positions are too close.
How do you troubleshoot FANUC alarm CVIS-352?
Please set trigger offset 1 and trigger offset 2 correctly.

Related codes / Codes liés

CVIS-350Initial measurement position is not set.CVIS-351Invalid motion group number.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →