LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm FRCE-283 — Contouring limit error (F:…)

Manufacturer wording — Contouring limit error (F:%d^1)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC FRCE-283 (“Contouring limit error (F:…)”): A position error occurred during contouring which exceeded the limit value. First check: Reduce the velocity command or increase the value of the push distance limit in the contouring force schedule.

Updated 2026-09-17 · LogrobotLM reference

Description

A position error occurred during contouring which exceeded the limit value.

Remedy

Reduce the velocity command or increase the value of the push distance limit in the contouring force schedule.

Related codes

FRCE-281Contouring start (F:…)FRCE-282Contouring end (F:…)FRCE-284Contouring option is not orderedFRCE-285Auto tuning is impossible

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →