LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-365 — ABORT Predefined window not opened

Manufacturer wording — ABORT (%s^4, %d^5) Predefined window not opened
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-365 (“ABORT Predefined window not opened”): KAREL program error. First check: Check the use of this file.

Updated 2026-09-17 · LogrobotLM reference

Description

KAREL program error. A FILE pre-defined by the system is not opened.

Remedy

Check the use of this file.

Related codes

INTP-363PAUSE FRAME:P3 exists on line P2-P1INTP-364ABORT String too short for dataINTP-366ABORT I/O status is not clearedINTP-367ABORT Bad base in format

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →