LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-363 — PAUSE FRAME:P3 exists on line P2-P1

Manufacturer wording — PAUSE (%s^4, %d^5) FRAME:P3 exists on line P2-P1
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-363 (“PAUSE FRAME:P3 exists on line P2-P1”): KAREL program error. First check: Teach P3 out of the X-axis direction.

Updated 2026-09-17 · LogrobotLM reference

Description

KAREL program error. The X-Y plane cannot be calculated in the FRAME built-in routine be P3 is located in the X-axis direction.

Remedy

Teach P3 out of the X-axis direction.

Related codes

INTP-361PAUSE FRAME:P2 is same as P1INTP-362PAUSE FRAME:P3 is same as P1INTP-364ABORT String too short for dataINTP-365ABORT Predefined window not opened

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →