LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-368 — PAUSE Cannot use specified program

Manufacturer wording — PAUSE (%s^4, %d^5) Cannot use specified program
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-368 (“PAUSE Cannot use specified program”): KAREL program error. First check: Refer to the error code.

Updated 2026-09-17 · LogrobotLM reference

Description

KAREL program error. The specified program cannot be used.

Remedy

Refer to the error code. Use MENU to display the Alarm Log screen.

Related codes

INTP-366ABORT I/O status is not clearedINTP-367ABORT Bad base in formatINTP-369ABORT Timeout at WAIT_AMRINTP-370ABORT Vision CPU not plugged in

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →