LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm LSTP-011 — ABORT Motion grp … is in LSTOP

Manufacturer wording — ABORT Motion grp %d is in LSTOP
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC LSTP-011 (“ABORT Motion grp … is in LSTOP”): The motion command was received while the specified group is in the local stop mode. First check: Press RESET then disable the local stop if you want to send a motion command to this motion group.

Updated 2026-09-17 · LogrobotLM reference

Description

The motion command was received while the specified group is in the local stop mode.

Remedy

Press RESET then disable the local stop if you want to send a motion command to this motion group.

Related codes

LSTP-009ABORT SDI1 ON in HDWR_DSBLLSTP-010ABORT Motion grp … entering LSTOPLSTP-012ABORT LSU … is in HDWR FAIL modeLSTP-013Motion grp … Torque active

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →