LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-264 — WARN Canister Position Increasing

FANUC PAIN-264 (“WARN Canister Position Increasing”): This is caused by the piston moving during a color change when the piston is held at the bottomof the can for cleaning. First check: N/A

Updated 2026-09-17 · LogrobotLM reference

Description

This is caused by the piston moving during a color change when the piston is held at the bottomof the can for cleaning. In theevent that the cleaning solvent and air pressure, overcome the piston air pressure, then this alarm will occur.: Perform a scale calibration toinsure that the calculated valuefor the Can Empty Check Counts is valid. Increase the Fill Error Tolerance. Verify that the piston pressure is not being restricted.

Remedy

N/A

Related codes

PAIN-262WARN Auto Calibration SuccessfulPAIN-263WARN Non-decreasing canister positionPAIN-265WARN Intermittent Connection DetectedPAIN-266WARN Flow Error High, Valve: …

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →