FANUC Alarm PAIN-276 — WARN %sCal. low flow rate reset
FANUC PAIN-276 (“WARN %sCal. low flow rate reset”): During Accuflow calibration the low flow rate could not be reached. First check: Possibly decrease the Gain modifier used for the color.
Updated 2026-08-29 · LogrobotLM reference
Description
During Accuflow calibration the low flow rate could not be reached. A new low flow rate was established.
Remedy · Remède
Possibly decrease the Gain modifier used for the color. The new low flow rate is shown as point 2 in the calibration table. This value can be visually checked and accepted.
Frequently asked · Questions fréquentes
- What does FANUC alarm PAIN-276 mean?
- FANUC PAIN-276 (“WARN %sCal. low flow rate reset”): During Accuflow calibration the low flow rate could not be reached. A new low flow rate was established.
- How do you troubleshoot FANUC alarm PAIN-276?
- Possibly decrease the Gain modifier used for the color. The new low flow rate is shown as point 2 in the calibration table. This value can be visually checked and accepted.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →