LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PICK-008 — Error communicating with Robs

FANUC PICK-008 (“Error communicating with Robs”): An error occurred while this robot tried to get data from another robot over the robot ring or Ethernet. First check: Check if all robots have a valid IP address and PickTool software.

Updated 2026-09-17 · LogrobotLM reference

Description

An error occurred while this robot tried to get data from another robot over the robot ring or Ethernet.

Remedy

Check if all robots have a valid IP address and PickTool software. If ok, then document the events that led to the error and provide information on the program and line number where this error occurred to your FANUC or FANUC

Related codes

PICK-006Robot Grp … is already masterPICK-007Robot not assigned to networkPICK-009No robot is a masterPICK-010More than 1 robot is a master

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →