LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-008 — Robot motion is not enabled

FANUC PNT1-008 (“Robot motion is not enabled”): The UOP enable input is OFF. First check: The UOP enable input must be ON.

Updated 2026-08-29 · LogrobotLM reference

Description

The UOP enable input is OFF.

Remedy · Remède

The UOP enable input must be ON.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-008 mean?
FANUC PNT1-008 (“Robot motion is not enabled”): The UOP enable input is OFF.
How do you troubleshoot FANUC alarm PNT1-008?
The UOP enable input must be ON.

Related codes / Codes liés

PNT1-006REMOTE switch must be REMOTEPNT1-007Machine lock is ONPNT1-009Invalid job %s receivedPNT1-010Invalid tutone %s received

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →