FANUC Alarm PNT1-009 — Invalid job … received

Manufacturer wording — Invalid job %s received
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-009 (“Invalid job … received”): An invalid job number was received from the PLC. First check: The PLC must initialize the robot with a valid job number.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →