LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-048 — Failed to adj. color valve table size

FANUC PNT1-048 (“Failed to adj. color valve table size”): There is not enough memory available for the application to adjust the size of the color valves table to match the requested setting. First check: Use a smaller setting that is within the memory constraints of the controller.

Updated 2026-09-17 · LogrobotLM reference

Description

There is not enough memory available for the application to adjust the size of the color valves table to match the requested setting.

Remedy

Use a smaller setting that is within the memory constraints of the controller.

Related codes

PNT1-046Adj. color valves table size to …PNT1-047Failed to adj. color table sizePNT1-053Invalid parameter indicatorPNT1-054No channel/parameter indicated

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →