LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-054 — No channel/parameter indicated

FANUC PNT1-054 (“No channel/parameter indicated”): The PLC sent a parameter indicator value of 0. First check: Correct the parameter indicator value at the PLC.

Updated 2026-09-17 · LogrobotLM reference

Description

The PLC sent a parameter indicator value of 0.

Remedy

Correct the parameter indicator value at the PLC.

Related codes

PNT1-048Failed to adj. color valve table sizePNT1-053Invalid parameter indicatorPNT1-055Manual inputs are enabledPNT1-056Manual inputs are disabled

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →