LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-113 — Servo amp overheat alarm

FANUC PNT1-113 (“Servo amp overheat alarm”): This alarm is echoed to the PLC when a SRVO-049 SERVO OHAL1 alarm (Grp:… Ax:…) is posted. First check: Refer to SRVO-049 for the remedy.

Updated 2026-09-17 · LogrobotLM reference

Description

This alarm is echoed to the PLC when a SRVO-049 SERVO OHAL1 alarm (Grp:… Ax:…) is posted. Refer to the Teach Pendant alarm screen for the group and axis number. Refer to SRVO-049 for the cause.

Remedy

Refer to SRVO-049 for the remedy.

Related codes

PNT1-111High current alarmPNT1-112Low voltage alarmPNT1-114Collision alarmPNT1-115Pulse coder battery discon alarm

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →