LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-174 — Beaker Timeout, Scale Cal Aborted

FANUC PNT1-174 (“Beaker Timeout, Scale Cal Aborted”): Not enough time has been allowed to empty the canister fully by the time specified in Beaker Fill Timeout. First check: Check the following:

Updated 2026-08-29 · LogrobotLM reference

Description

Not enough time has been allowed to empty the canister fully by the time specified in Beaker Fill Timeout. The canister did not empty due to the trigger or regulator not opening. Or, there has been a loss of canister position feedback.

Remedy · Remède

Check the following:

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-174 mean?
FANUC PNT1-174 (“Beaker Timeout, Scale Cal Aborted”): Not enough time has been allowed to empty the canister fully by the time specified in Beaker Fill Timeout. The canister did not empty due to the trigger or regulator not opening. Or, there has been a loss of canister position feedback.
How do you troubleshoot FANUC alarm PNT1-174?
Check the following:

Related codes / Codes liés

PNT1-172Failed to find Upper limitPNT1-173Failed to find Lower limitPNT1-175(%s) Non-increasing cal tablePNT1-176Calculated output > Max Output

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →