LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-225 — Data Monitor is disabled

FANUC PNT1-225 (“Data Monitor is disabled”): The Data Monitor subsystem has been disabled because the limit on the data files set by the user has been reached. First check: Enable Data Monitor Operation from the UTILITIES Data Monitor screen.

Updated 2026-09-17 · LogrobotLM reference

Description

The Data Monitor subsystem has been disabled because the limit on the data files set by the user has been reached.

Remedy

Enable Data Monitor Operation from the UTILITIES Data Monitor screen. On the SETUP Diagnostics screen, consider increasing Max Data Files Stored or setting Disable After Max Files to NO, if these settings caused Data Monitor to be disabled. Refer to the FANUC PaintTool Operator's Manual Advanced Functions chapter for more information.

Related codes

PNT1-216No defined color (color=)PNT1-224WAITCONV late for line …PNT1-226Maximum DMON Data Files exceededPNT1-227DMON in progress, item locked

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →