LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-514 — Color cycle aborted

Manufacturer wording — %sColor cycle aborted
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-514 (“Color cycle aborted”): For integral color change systems, a color change cycle was cancelled by an E-STOP. First check: Reset the system.

Updated 2026-09-17 · LogrobotLM reference

Description

For integral color change systems, a color change cycle was cancelled by an E-STOP.

Remedy

Reset the system. If in production mode, the color change cycle will be started over from the beginning.

Related codes

PNT1-512Pushout cycle cancelledPNT1-513Illegal manual cycle receivedPNT1-515Color Valve + PrgSol both ONPNT1-516Using default valve cycle data

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →