FANUC Alarm PNT1-515 — %sColor Valve + PrgSol both ON
FANUC PNT1-515 (“%sColor Valve + PrgSol both ON”): For integral color change systems, during the execution of a color change cycle, the color enable output and the Purge Solvent output are not allowed to be on at the same time. First check: Check the cycle data table and make sure the color enable and Purge Solvent outputs are never on at the same time.
Updated 2026-08-29 · LogrobotLM reference
Description
For integral color change systems, during the execution of a color change cycle, the color enable output and the Purge Solvent output are not allowed to be on at the same time. If the color change cycles attempt to do this, the cycle is aborted. (This is to prevent contamination of the paint lines.)
Remedy · Remède
Check the cycle data table and make sure the color enable and Purge Solvent outputs are never on at the same time.
Frequently asked · Questions fréquentes
- What does FANUC alarm PNT1-515 mean?
- FANUC PNT1-515 (“%sColor Valve + PrgSol both ON”): For integral color change systems, during the execution of a color change cycle, the color enable output and the Purge Solvent output are not allowed to be on at the same time. If the color change cycles attempt to do this, the cycle is aborted. (This is to prevent…
- How do you troubleshoot FANUC alarm PNT1-515?
- Check the cycle data table and make sure the color enable and Purge Solvent outputs are never on at the same time.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →