LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-525 — %sColorEnb + PrgSol both ON

FANUC PNT1-525 (“%sColorEnb + PrgSol both ON”): For integral color change systems, during the manual I/O testing of color change I/O, the color enable output and purge solvent output are not allowed to be on at the same time. First check: Do not attempt to turn on the outputs at the same time.

Updated 2026-08-29 · LogrobotLM reference

Description

For integral color change systems, during the manual I/O testing of color change I/O, the color enable output and purge solvent output are not allowed to be on at the same time.

Remedy · Remède

Do not attempt to turn on the outputs at the same time.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-525 mean?
FANUC PNT1-525 (“%sColorEnb + PrgSol both ON”): For integral color change systems, during the manual I/O testing of color change I/O, the color enable output and purge solvent output are not allowed to be on at the same time.
How do you troubleshoot FANUC alarm PNT1-525?
Do not attempt to turn on the outputs at the same time.

Related codes / Codes liés

PNT1-523%sCC Waiting for arm to be homePNT1-524%sCC automatic cycles executingPNT1-526%sColorEnb + PrgAir both ONPNT1-527%sSelected color valve not defined

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →