LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-615 — %sFlow rate avg. error excessive

Description

Comparisons of how far the measured flow rate is from the setpoint had too large of a result. The size of the error between measured flow and the setpoint that will cause this alarm, and is controlled by the Max. error from setpoint parameter. Possible causes are:

Remedy · Remède

Check and perform the following:

Related codes / Codes liés

PNT1-613%sCal. table adapted in tolerancePNT1-614%sDyn. yield > %% tolerance bandPNT1-616%sCalibration successfulPNT1-617%sCalibration aborted

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.