LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-613 — %sCal. table adapted in tolerance

FANUC PNT1-613 (“%sCal. table adapted in tolerance”): Just a notification that the calibration table has returned to the normal operating range (as defined by the Adaptive tolerance). First check: None.

Updated 2026-08-29 · LogrobotLM reference

Description

Just a notification that the calibration table has returned to the normal operating range (as defined by the Adaptive tolerance).

Remedy · Remède

None.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-613 mean?
FANUC PNT1-613 (“%sCal. table adapted in tolerance”): Just a notification that the calibration table has returned to the normal operating range (as defined by the Adaptive tolerance).
How do you troubleshoot FANUC alarm PNT1-613?
None.

Related codes / Codes liés

PNT1-606CH2:Dyn. yield > tolerance band (%s)PNT1-612%sCal. table adapted out,output upPNT1-614%sDyn. yield > %% tolerance bandPNT1-615%sFlow rate avg. error excessive

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →