LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-630 — %sFast air flow leak detected

Description

A large amount of air flow was detected when the gun was not turned on. This might be caused by a leaking trigger valve, leaking air line, broken air line, broken applicator, or any other air leak between the air flow sensor and the gun.

Remedy · Remède

The the applicator and the various air lines should be inspected and repaired immediately.

Related codes / Codes liés

PNT1-628%sRequested flow above cal. tablePNT1-629%sSlow air flow leak detectedPNT1-631%sFailed to reach setpointPNT1-632%s0 air flow rate timeout

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.