LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-667 — %sMax. flow is below midpt. output

FANUC PNT1-667 (“%sMax. flow is below midpt. output”): During calibration it was found that the maximum amount of flow occurred with the command output at only the middle (midpoint) of the range. First check: Check that the I/P transducer is within the correct right range.

Updated 2026-08-29 · LogrobotLM reference

Description

During calibration it was found that the maximum amount of flow occurred with the command output at only the middle (midpoint) of the range. This indicates that there is incorrect equipment installed, or the equipment is faulty. This might also indicate a large air leak.

Remedy · Remède

Check that the I/P transducer is within the correct right range. If not, replace it. Check that the booster has the correct ratio, typically 1 to 1. If the alarm log also has a leak alarm, follow the remedies for that alarm. If this equipment must be used, reduce the Max. control value for this parameter by about 20%.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-667 mean?
FANUC PNT1-667 (“%sMax. flow is below midpt. output”): During calibration it was found that the maximum amount of flow occurred with the command output at only the middle (midpoint) of the range. This indicates that there is incorrect equipment installed, or the equipment is faulty. This might also indicate a large…
How do you troubleshoot FANUC alarm PNT1-667?
Check that the I/P transducer is within the correct right range. If not, replace it. Check that the booster has the correct ratio, typically 1 to 1. If the alarm log also has a leak alarm, follow the remedies for that alarm. If this equipment must be used, reduce the Max. control value for this parameter by about 20%.

Related codes / Codes liés

PNT1-665%sDyn. yield > min tolerance bandPNT1-666%sCal. table adapted out, downPNT1-668%sLeak detect when zeroing meterPNT1-673%sEstat controller warning

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →