LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-719 — %sRequested speed over valid range

FANUC PNT1-719 (“%sRequested speed over valid range”): The requested turbine speed output command is above the range that is considered valid Adjust the turbine speed command that is used in the preset table so it is within an acceptable range. First check: N/A

Updated 2026-08-29 · LogrobotLM reference

Description

The requested turbine speed output command is above the range that is considered valid Adjust the turbine speed command that is used in the preset table so it is within an acceptable range.

Remedy · Remède

N/A

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-719 mean?
FANUC PNT1-719 (“%sRequested speed over valid range”): The requested turbine speed output command is above the range that is considered valid Adjust the turbine speed command that is used in the preset table so it is within an acceptable range.
How do you troubleshoot FANUC alarm PNT1-719?
N/A

Related codes / Codes liés

PNT1-717%sMax.dV/dT detectedPNT1-718%sMax. output has speed < setpointPNT1-720%sFailed to reach setpointPNT1-721%sZero turbine speed timeout

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →