LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-825 — %sCalibration Aborted

FANUC PNT1-825 (“%sCalibration Aborted”): The ServoBell auto calibration aborted. First check: Slow down the Cal Empty Speed.

Updated 2026-08-29 · LogrobotLM reference

Description

The ServoBell auto calibration aborted.

Remedy · Remède

Slow down the Cal Empty Speed. Ensure that the trigger is not clogged and opens fully. Ensure that the software limit does not exceed 2 mm.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-825 mean?
FANUC PNT1-825 (“%sCalibration Aborted”): The ServoBell auto calibration aborted.
How do you troubleshoot FANUC alarm PNT1-825?
Slow down the Cal Empty Speed. Ensure that the trigger is not clogged and opens fully. Ensure that the software limit does not exceed 2 mm.

Related codes / Codes liés

PNT1-823%sHIGH ServoBell TORQUEPNT1-824%sServoBell motor not readyPNT1-826%sCalibration Time OutPNT1-827%sCanister Calibration Successful

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →