FANUC Alarm PNT1-826 — Calibration Time Out
Manufacturer wording — %sCalibration Time Out
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PNT1-826 (“Calibration Time Out”): The ServoBell auto calibration aborted due to a time out when the system was trying to determine the empty can position. First check: Ensure that all faults are cleared, and that the ServoBell motor is turning during the calibration process.
Updated 2026-09-17 · LogrobotLM reference
Description
The ServoBell auto calibration aborted due to a time out when the system was trying to determine the empty can position.
Remedy
Ensure that all faults are cleared, and that the ServoBell motor is turning during the calibration process.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →