FANUC Alarm PNT1-832 — PNT1-832
Manufacturer wording — %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PNT1-832 (“PNT1-832”): An attempt was made to extend or retract the valve at SpeedDock side A or B, but failed. First check: Check the retract or extend sensor at SpeedDock side A or B.
Updated 2026-09-17 · LogrobotLM reference
Description
An attempt was made to extend or retract the valve at SpeedDock side A or B, but failed.
Remedy
Check the retract or extend sensor at SpeedDock side A or B. If it was an extended fault, ensure that the pusher extended fully at the Speed Dock side A or B. If it was a retracted fault, ensure that the pusher retracted fully at SpeedDock side A or B and that the valve is not stuck in the extended state. Ensure that sufficient air pressure is available for this operation and that the air lines are connected.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →